Just as you can set shortcuts in KDE, you can map keystrokes to actions in Vim. A mapping can be as simple as creating an abbreviation that converts your initials to your full name, or something more complicated, like running a function when you press F10. Let’s take a look at mappings, and how they can make you much more productive when working in Vim.
Types of mappings
Vim actually recognizes different types of mappings, depending on what mode the editor is in. For example, you might have a mapping for F2 in insert mode that enters an HTML tag or a line of C code, and a different mapping for F2 that toggles the syntax mode on when you’re in normal mode.
Vim provides several different types of map commands, including:
cmaphandles command-line mappings.
imaphandles insert-only mappings.
mapmaps keys in normal, visual, and operator-pending mode.
map!maps keys in Vim’s command and insert modes.
nmapmaps keys in normal mode only.
omapmaps keys in operator-pending mode only.
vmapmaps keys in visual mode only.
imap if you want to set a mapping that works in Vim’s insert mode,
cmap for mappings to work in command (last line) mode,
omap to map keys to function after an operator has been used in normal mode, and so on.
Setting a mapping
Let’s start with something simple. To set a mapping while in Vim, enter command mode and use the
map command. Here’s a quick example:
:map <F10> <Esc>:tabnew<CR>
The syntax is pretty simple. First you tell Vim that you’re setting a mapping. Then, tell Vim the key that will be bound to the action — in this case,
F10. Finally, spell out the action that Vim will perform when you use
F10. This is pretty easy, because you’re basically just listing the same keystrokes that you’d use if you were doing it manually.
In this example, we tell Vim to enter command mode (
Esc:) and run the
tabnew command, followed by the carriage return to return us to normal mode. (<CR> is the same as <Enter>, just faster to type.) Now, when you type
F10 in normal mode, visual mode, or operator-pending mode, Vim will open a new tab.
Every now and again, it might be useful to set a mapping on the fly — but the odds are, if it’s worth doing once, it’s worth setting the mapping permanently. To do this, just open your .vimrc and insert the mapping there, like so:
map <F10> <Esc>:tabnew<CR>
Want to see all of the mappings you have set? Type
:map with no arguments, and Vim will list the defined mappings, like so:
n ,S <Esc>:syn off<CR> n ,s <Esc>:syn on<CR> <F11> <Esc>:setlocal nospell<CR> <F10> <Esc>:setlocal spell spelllang=en_us<CR>
The other mapping commands,
:omap, can also be used without arguments to show what characters are mapped for those modes — the
:map command only shows keys mapped for modes set with
In this example, you can see that I have
F10 set to turn on spellchecking, and
F11 set to turn it off. This will work in normal and visual mode. In normal mode, using
,S will turn syntax highlighting off, and
,s will turn it on. I use the comma in that mapping for a couple of reasons. First, the comma has no special meaning in normal mode on its own. Second, it’s within easy reach of the home keys.
Since I spend a lot of time working with HTML, I’ve set a few mappings to work in insert mode to insert HTML tags that I use frequently:
imap <F2> <p> imap <F3> <strong> imap <F4> <em> imap <F5> <code> imap <F6> <a href=" imap <S-F6> "> imap <F7> <blockquote> imap <S-F2> < imap <S-F3> >
You can also set a mapping to call a function. For instance, I like Vim’s highlight search, when I’ve just performed a search. But I like to get rid of the highlighting as soon as I am done with it. I found a useful tip on the Vim.org site with a function to toggle highlight search, so I could turn it off and on with a simple quick keystroke. Here’s the function that I put in my .vimrc:
function ToggleHLSearch() if &hls set nohls else set hls endif endfunction
Then, I added this to the mapping section:
nmap <silent> <C-n> <Esc>:call ToggleHLSearch()<CR>.
In this example,
<silent> isn’t a key — it’s to tell Vim not to print a message when it runs the command. Then, the key shortcut that is mapped to the action, and the action that will be called.
Mappings can be really useful once you start writing your own Vim functions — or using Vim functions that other folks have written already. It’s certainly easier to type
Ctrl-n than type
:call ToggleHLSearch() every time!
Also, I don’t know about other Vim users, but I’ve always found the
F1 mapping for Vim’s
:help command to be a bit annoying. It’s not unusual for me to accidentally tap the F1 key when I mean to hit Escape or F2. So I’ve taken to mapping F1 to Escape in my .vimrc:
map <F1> <Esc> imap <F1> <Esc>
From time to time, you might want to get rid of a mapping. You can do this in a couple of ways. The first is to change the mapping for a key — if you want to set F10 to a new mapping, just run
:map <F10> command , to replace it for that session. To unmap it completely, use
Each of the map commands has its own unmap command — so, to unmap an insert map (
imap) command, use
:iunmap; to unmap a normal mode command (
:nunmap; and so forth.
:map commands, the
:unmap commands require an argument — so, running
:unmap won’t just unset all of the active mappings, it will simply return an error.
You can also prevent a key from being remapped by using the
:noremap command, or
:onoremap, etc. This can be useful if you want to set a mapping using
map, but want that key to be used for something else in operator-pending mode, or something like that. Despite the name, you can override a noremap command while in Vim.
We’ve covered the notation for some of the special keys already, such as Escape (<Esc>), Enter (<CR>), and function key notation (<F1>, <F2>, etc.). For the most part, the notation is pretty intuitive, but not always.
For example, if you want to set a mapping for Ctrl-Esc, you’d use <C-Esc>. If you want to use Shift-F1, you’d use <S-F1>. For Mac users, if you want to set a mapping for the Command key (the weird symbol-thingy that PC users scratch their heads over), you’d use <D>. Note that Alt and Meta are the same, and you can use <M-key> or <A-key>.
You can also combine several keys if you want to emulate the Emacs hand-cramp style of key mappings. For example, if you want to run a command using Shift-Alt-F2, you could use
map <S-A-F2> command .
See the Vim online help for a full list of special keys and their notation.
Abbreviations are much like mappings, but they’re used primarily to insert plain strings of text. They’re only triggered when you enter a character like a space, Escape, or Enter. If I set a mapping for F10, it takes effect as soon as I type
F10. If I set an abbreviation for insert mode to replace “i” with “I,” it won’t take effect if I type “imagine” or “Delphi,” but it will take effect if I type just “i” followed by a space.
Another difference between mappings and abbreviations is that you can’t use special keys, such as F10 or Shift-F10, to trigger an abbreviation. That’s OK, because abbreviations tend to accumulate, and there are only so many ways you can combine the function, Control, Alt, and Shift keys anyway. (Especially since desktop environments like KDE also claim a number of them.)
Abbreviations are useful for a number of situations. For example, if you are prone to certain typos — like typing “helllo” instead of “hello” — just set an abbreviation in your .vimrc like this:
ab helllo hello
If you’d like the abbreviation to work in insert mode only, use
Like mappings, abbreviations can be unset during your session. To remove a single abbreviation, use
:una abbrv . To clear all abbreviations, use
If you go at it a little at a time, eventually you’ll have a set of mappings and abbreviations tuned for your work that help make Vim even more efficient than it is to begin with.
(This post was originally written for and appeared on Linux.com. It has been rescued from oblivion by Archive.org and copypasta.)